▲ 主编的行业标准 (Mainly Participate in the Editing of Industry Standards)
◆ 中国工程建设标准协会标准《钢水罐砌筑工程施工及验收规程》CECS251：2009
“Ladle Refractory Construction and Acceptance Procedure” CECS251：2009, Standards of China Engineering Construction Standards Association
◆ 中国工程建设标准协会标准《炼钢连铸中间包砌筑施工及验收规程》CECS310：2012
“Construction and Acceptance Procedure of Continuous-casting tundish” CECS310：2012, Standards of China Engineering Construction Standards Association
◆ 中国工程建设标准协会标准《钢液真空循环脱气法（RH）真空炉砌筑工程施工及验收规程》CECS450：2016
“ Construction and Acceptance Procedure of RH Vacuum furnace” CECS450：2016, Standards of China Engineering Construction Standards Association
▲ 参加编写的国家行业标准 (Participate in the Editing of National Industry Standards)
◆ 《工业炉砌筑工程质量验收规范》GB50309-2017
“Quality Inspection and Assessment Standard for Industry Furnace Construction” GB50309-2017
◆ 《工业炉砌筑工程施工与验收规范》GB50211-2014
“Industry Furnace Construction and Acceptance Procedure” GB50211-2014
◆ 《残碳量小于7%的碱性致密定形耐火制品分类》GB/T18931-2008
“Classification of Basic Dense Shaped Refractory Products with residual carbon content less than 7%”, GB/T18931-2008
◆ 《铝硅系致密定形耐火制品分类》GB/T17105-2008
“Classification of Al-Si Dense Shaped Refractory Products”, GB/T17105-2008
◆ 《高炉及热风炉用耐火砖形状尺寸》
“Shape & Size of Refractory Brick for Blast Furnace and Hot Stove”
◆ 《钢包用耐火砖形状尺寸》
“Shape & Size of Refractory Brick for ladle”
▲ 参加编写的行业施工指导手册 (Participate in the Editing of Construction Instruction)
◆ 《筑炉工手册》
“Operate Instruction for Furnace Construction”
▲ 武汉市科技成果 (Science and Technology Achievements of Wuhan)
◆ 提高武钢二炼钢厂90吨真空炉寿命攻关
“Technical Innovation for increasing life of 90T RH Refining Furnace in No.2 Steelmaking Mill, WISCO”
◆ 武钢炼钢总厂二分厂80t钢包长寿研究
“Long-life Research for 80t Ladle of No.2 Steelmaking Mill, WISCO”
◆ 500万t/a球团焙烧系统环冷机耐材长寿技术的研究与应用
Research and Application about the Refractory’s Long Life of Sintering Circular Cooler in 5 million t/a Pellet Baking System
◆ 武钢炼钢总厂三分厂250/300t钢水罐长寿技术研究与应用
Research and Application about the Long Life of 250/300t Steel Ladle in No.3 Steelmaking Mill, WISCO
◆ 200吨RH精炼炉长寿技术研究
Research about Long Life of 200MT RH Refining Furnace
◆ 连铸用重型翻包机技术改造与应用
Technical Improvement and Application for Overturn Device of Heavy Ladle in Continuous Casting Production
◆ 40吨五流T型连铸中间包长寿技术研究
Technical Research about the Long Life of 40MT 5-Strand Type-T Tundish of Continuous Casting Machine
◆ 大型炼钢转炉炉衬结构优化及施工技术的研究与应用
Research and Application about the Optimization and Construction Technology of Converter Lining
◆ 提高大型钢水罐使用性能的研究与应用
Research and Application about the Performance Improvement of the Large Steel Ladle
◆ 一种多点布控锁砖的转炉炉底结构及其砌筑方法
Complex Structure and Construction Method of Converter Bottom Lining
◆ 一种炼钢厂钢水连续浇铸用中间包的施工方法
Construction Method of Continuous Casting Tundish in the Steelmaking Mill